TL;DR: To set up a checkers board, place 12 pieces per player on the dark squares of the three rows closest to each side. The board sits with a dark square in the bottom-left corner. Both players must fill the same pattern of dark squares so the position is mirrored, and the two centre rows stay empty.
Get the board orientation right first
This is the step almost everyone skips, and getting it wrong makes the rest of the setup look wrong even when it is not.
A checkers board is placed so that each player has a dark square at the near-left corner. For the player at the bottom, that means the bottom-left square is dark. For the opponent at the top, the same rule applies from their perspective.
Because an 8×8 board has 32 dark squares and the pattern alternates, the two views are consistent: dark bottom-left for one player is dark top-right for the other, which is exactly what mirrored play requires.
If you find yourself with a light square in the bottom-left, rotate the board 90 degrees.
The three-row rule, precisely
Each player occupies three full rows. On an 8×8 board those are rows 1, 2, and 3 for the bottom player, and rows 6, 7, and 8 for the top player.
Within those rows, pieces go on dark squares only. Since dark squares alternate, each row contains exactly four dark squares. Three rows times four squares equals 12 pieces per side.
That arithmetic is the quickest way to check a setup you are unsure about. If a side has more or fewer than twelve pieces, something is misplaced.
What the finished board looks like
Reading from the bottom player’s perspective:
- Row 1 (nearest you): pieces on the four dark squares, alternating with empty light squares
- Row 2: pieces on the dark squares, offset by one from row 1
- Row 3: same pattern as row 1
- Rows 4 and 5: completely empty, this is the middle of the board
- Rows 6, 7, 8: the opponent’s pieces, mirroring your three rows
The staggered look is correct. If your pieces form a solid block with no gaps, they are on the wrong squares.
The five setup mistakes
Using light squares. Pieces on light squares cannot move diagonally under standard rules, so the game is unplayable from the start.
Filling four rows. That gives 16 pieces instead of 12 and eliminates the middle. Common when someone counts rows instead of squares.
Starting with a light square bottom-left. The board is rotated, and the diagonal structure is mirrored incorrectly.
Putting pieces in the middle rows. The two centre rows must be empty at the start.
Mixing colours on one side. Each player’s twelve pieces should be a single colour or design.
Which colour moves first
In standard checkers, the darker colour moves first, and play proceeds alternately. Some casual games and some platforms let the lighter side open instead, so confirm the convention if you are playing a formal match.
For a friendly game it rarely matters as long as both players agree before the first move. What matters is that the rule is settled, because the opening player has a measurable initiative advantage.
Board variants worth knowing
The 8×8 setup is the standard, but not the only one.
International draughts uses a 10×10 board with 20 pieces per side, which changes the dynamics substantially. Smaller variants exist on 6×6 boards for teaching, with fewer pieces and quicker games. Diagonal-only boards printed specifically for checkers skip the unusable light squares entirely, which removes the setup error.
If you are teaching a child, the 6×6 version is genuinely useful: the same rules, a much shorter game, and fewer pieces to keep track of.
Setting up quickly
If you are setting up repeatedly, develop a physical habit rather than counting each time. Fill one row, then the offset row, then the first row’s pattern again. Three rows of four is easier to verify visually than to count to twelve.
You can also confirm by symmetry: whatever pattern you create on your three rows should mirror exactly on the opponent’s side, leaving two clear rows in between.
If you want to skip the physical setup entirely, playing checkers online gives you a correctly arranged board immediately, which is a practical way to learn the position by seeing it rather than reading about it.
Setting up for a physical board versus a screen
The rules are the same, but the practical concerns differ enough to mention.
On a physical board, the main risks are a rotated board and mixed pieces. Check the corner colour before anything else, and keep each side’s twelve pieces in a single container so they cannot be confused. A cloth bag per player solves this permanently.
On a screen, the board is always correctly oriented, which removes the most common error but introduces two others: misclicking an adjacent square, and failing to notice that a capture was mandatory. Most platforms highlight legal moves precisely to reduce the first problem.
If you are learning, the screen has a genuine advantage. Seeing legal moves highlighted teaches the mandatory-capture rule faster than reading about it, because the interface simply will not let you play the illegal move.
The short answer
Dark square bottom-left, twelve pieces each on the dark squares of the nearest three rows, two empty centre rows. Four dark squares per row, three rows per player. Once you have done it twice, you will not need to count again.

